SkiPulk Channel Kit Pole Connector Kit
$32.00
The Channel Kit includes the aluminum channels and backing plates, stainless steel nuts, bolts and washers as well as the nickel plated wirelock pins used to attach our poles to a sled. (Note: this comes included with any pole set)
Description
- The backing plate is 1″ wide x 4″ long
- The channel is 1.25″ wide x 1.5″ long (inside the channel is 1″ wide)
- The wirelock pin is 3/8″ in diameter and 1-3/8″ long
- There is 5/16″ of clearance when the pin is installed in the channel
Find written instructions to install the Channel Kit here.
1 review for SkiPulk Channel Kit Pole Connector Kit
YOU MAY ALSO LIKE...
DIY GUIDE:
BUILD YOUR OWN PULK
Enter your email address to get a FREE copy!
Dave Eilers –
This is a great high quality hardware kit to make a pulk sled. I also bought the 6′ fiberglass poles and the rear fin kit. Together with an expedition sled it worked AMAZING. I rigged it up to an old external frame backpack. I had about 20 pounds in the pack and about 40 pounds on the sled. I was able to go almost anywhere. Over and around trees, through creeks, rocks, steep side hills etc. The sled never tipped over and never ran down a steep side hill. Very impressed with this system!! Thanks!