Skip to content

Ultra Light-Weight Racing Pulk

From: $360.00

Northern Sled Works ultra light-weight racing pulk sled is made of Ultra High Molecular Weight polyethylene (UHMW).  UHMW is a remarkable material.  It’s incredibly tough and takes a lot of abrasion by rocks. This is the sled only – additional optional accessories can be added below.

Poles Poles

Better poles make better pulks! Pulling your pulk with poles will allow for better control on hilly and/or forested terrain. All of our poles are incredibly strong while still being flexible enough to reduce injury or equipment failure during a fall.

Accessories Accessories

Paris Duffel Bag

Made by us specifically for the Paris system, this 48″×12″×15″ duffel with approximately 8,640 cubic inches of storage space is a perfect fit. Constructed with 600 denier water-resistant nylon and a full-length, #10 heavy-duty YKK zipper, it can handle the roughest abuse while keeping your gear safe from the elements. Oversized zipper pulls let you gain access without having to remove your gloves. Weighs approx 1.75lbs.

Maxx Waxx

This jojoba-based sled and ski wax is amazing in changing conditions. The heavily-flourinated paste rubs in easily and hardens on contact with warm, wet snow, ensuring easy turning, good control and stay-clean bottoms.

Field Repair Kit

Includes one of each of the pole ends (eye bolt and ball joint), a carabiner and wirelock pin. While it's extremely unlikely that any of our pole parts will break, certain collisions can result in twisting forces with enough force to shear the metal shafts of the parts. This kit allows for field repair.

Pulk Sled Bungee Rope with Channel Connector Kit

Built for flexibility and ease of use when pulk control isn't essential, this shock absorbing sled pulling bungee is designed to last. This product also includes the Channel Kit to attach to your pulk.

This rope pulling system is made of strong tubular webbing with an integrated bungee shock cord. Designed for use with SkiPulk's Expedition Rope Pulling Harness, or your own harness or pack waist belt, it includes four 12 kn carabiners; two attach to the sides of the harness and two attach to the pulk.

Pulling your pulk with rope allows quicker access to your sled without needing to disconnect poles.

Ideal for ultramarathon races, training, tire pulling, lake travel and other terrain not requiring as much control of your sled. When traveling in wooded or hilly areas, poles are still recommended for control.

 

$0.00

$360.00

Description

This ultra light-weight racing pulk is made of Ultra High Molecular Weight polyethylene (UHMW).  UHMW is a remarkable material.  It’s incredibly tough and takes a lot of abrasion by rocks. This pulk is ideal to use as a winter ultramarathon sled.

To make the sled load as narrow as possible for pulling, try loading it about six inches deep with heavy gear, then lacing the pulk tightly to pull the sides in.  A second layer can then be tied on top.  The sides can be pulled together at the front, or the center of the front can be pulled back to alter the angle at which the front of the sled meets the snow in deep snow conditions.

Store the sled out of direct sunlight.

Size:

  • 4′ Racing Pulk measures 3’6″ x 18″ with a flat bottom

Weight:

  • 4′ Racing Pulk weight: 3.5lbs

Details:

  • Integrated tracking
  • 4′ Racing pulk is made of tough, flexible 1/16″ white UHMW plastic

Click here for sizing information for our harness options.

DIY GUIDE:
BUILD YOUR OWN PULK

Enter your email address to get a FREE copy!